Description

The ANTRACK V2 is a cutting-edge mining unit designed to contain four ANTMINER Hyd units or four ANTMINER U2 Hyd units or two ANTMINER U3 Hyd units, while optimizing the mining process using hydro-cooling technology. With a substantial capacity and a maximum power load of 24 kW, it efficiently meets the energy demands of cryptocurrency mining.

The ANTRACK unit is precisely constructed to enable speedy deployment and efficient heat recovery, representing a big step forward in the hydro-cooling mining experience.

Bitmain Antrack V2 Hydro Specifications:

1 – Mining Cabinet

Hardware Configuration

Size (Length*Width*Height), mm (without package)	1200*600*1300
Size (Length*Width*Height), mm (with package)	1460*1330*780
Net weight, kg (without package)	130
Gross weight, kg (with package)	185
Network connection mode	RJ45 Ethernet 10/100M

Power Supply

Power supply AC Input voltage, Volt(1-1)	380~415V AC
Power supply AC Input Frequency Range, Hz	50~60
Power supply AC Input current, Amp(1-2)	63

Water pump

Rated power, W	450
Noise, dBA@1m	60
Lift, m	19
Size (Length*Width* Height), mm	360*210*268

Plate heat exchanger

Maximum heat exchange power, kW	30
Size (Length*Width* Height), mm	305*106*64
Diameter of water pipe connector, mm	DN20

2 – External Cooler

Hardware Configuration

Size (Length*Width*Height), mm (without package)	1160*1035*1570
Size (Length*Width*Height), mm (with package)	1310*1185*1770
Net weight, kg (without package)	380
Gross weight, kg (with package)	432

Power supply

Power supply AC input voltage, Volt(1-1)	380~415V AC
Power supply AC input frequency range, Hz	50~60
Maximum power supply AC input current, Amp(1-2)	63

Heat pump

Heating Capacity (typical), kW	32
Compressor Input (typical), kW	8
EER (typical)	3
Sound Level, Db(A)	77
Refrigerant	R134a
Heating water outlet temperature, °C	80

Fan

Rated power, W	1900
Noise, dBA@1m	74
Size (Length*Height*Thickness), mm	1010*1010*369

Water pump

Rated power, W	370
Noise, dBA@1m	74
Size (Length*Width* Height), mm	328*205*461

Environment Requirements

Ambient temperature, °C	-20~45
Water flow, L/min	32.0~40.0 (Cabinet side)
Water pressure, bar	≤3.5
Working fluid(1-4)	Antifreeze (10%)
Installation distance, m(1-5)	50
Liquid PH	7.8~8.5
Storage temperature, °C	-20~70
Operation humidity(non-condensing), RH	10~90%

NOTE:

1. Caution: Wrong input voltage may probably cause miner damaged.
2. Three-phase AC input.
3. The External cooler (heat pump) should be placed outdoors in a well-ventilated environment.
4. If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time.
5. The distance between mining cabinet and external cooler.