Description

The ANTRACK V1 is a cutting-edge mining unit designed to contain four ANTMINER S21 Hyd units, while optimizing the mining process using hydro-cooling technology. With a substantial capacity and a maximum power load of 24 kW, it efficiently meets the energy demands of cryptocurrency mining.

The unit has outstanding dimensions of 600mm width, 2000mm height, and 1000mm depth, with a substantial net weight of 300 kg, providing stability and longevity. An EJ45 Ethernet 10/100M interface provides dependable and rapid data transport. The power supply is as impressive, with an AC input voltage of 380 to 415 volts, a frequency of 50 to 60 Hz, and an input current of 80 amps.

The ANTRACK unit is precisely constructed to enable speedy deployment and efficient heat recovery, representing a big step forward in the hydro-cooling mining experience.

Bitmain Antrack V1 Hydro Specifications:

Product Glance

Model	ANTRACK
Version	V1
Capacity	4 units ANTMINER (S21 Hyd.)
Maximum load,kW	24

Hardware configuration

Size (width*height*depth),mm	600*2000*1000
Net weight, kg	300
Network connection mode	EJ45 Ethernet 10/100M

Power supply

Power supply AC input voltage, Volt(1-1)	380~415
Power supply AC input frequency range, Hz	50~60
Power supply AC Input current, Amp(1-2)	80

Environment requirements

Ambient temperature, °C	15~45
Water flow, L/min	32.0~40.0
Water pressure, bar	≤3.5
Working fluid(1-3)	Deionized water/Pure water
Liquid PH	8.5~9.5
Storage temperature, °C	-20~70
Operation humidity(non-condensing), RH	10~90%

NOTE:

1. Caution: Wrong input voltage may probably cause miner damaged
2. Three-phase AC input.
3. If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time.